This project is an “ESP32-Cam WiFi Robot” firmware arduino source code (.ino) and also can be used as a “Dome Camera”. This project is based on the “ESP32 WebApp Builder” and Arduino ESP32-CAM CCTV, WiFi IP Camera projects. The WiFi Robot project uses the “AI Thinker ESP32-CAM” module which has a 2MP Camera, 10 I/O…
Read more
The high voltage (parallel) programming method has been used for the WiCardKit Programmer which is the highest layer of access to the microcontroller memories and programming. This method can unlock the AVR/PIC chips which can’t be programmed by regular programmers while the chips work well. The other feature is the “reset” pin in some the…
Read more
ATmega8A is an AVR 8 bit microcontroller which has 28 pins. The “Alarm Clock And Calendar” project uses this microcontroller as its main processor and a standard 16×2 Character LCD without using any additional module. There’s a source code folder in this project which contains the CodeVision program files (C) and pre-compiled HEX file. To…
Read more
This project is a “Programmable and Code Learn IR Remote (InfraRed) With ATTiny13A”. ATTiny13A is a low-cost AVR microcontroller with 8 pins (6 I/O) and 1KB memory.There are two folders in this project, “PCB-SCH-BOM” and CodeVision Source.Also In the source code folder there is a pre-compiled file in the “HEX” folder. To re-compile or check…
Read more
ATTiny13A is a low-cost and tiny AVR microcontroller with 1KB memory. The PCB file of auto irrigation system has been made by “Altium”, also there is a “PDF” and “DipTrace” revision of the schematic and PCB in the project files. Link of the project in our online store: ATTiny13A Automatic Irrigation (Plants watering) Circuit, PCB…
Read more
WiCard 1.3 has been designed for producing in a high quantity. More engineers have reviewed the schematic and PCB of this revision of WiCard. WiCard 1.3 uses more and smaller parts than WiCard 1.0. Therefore WiCard 1.3 is a neat module for the producers and manufacturers to produce. We have already published a complete article…
Read more
Programmable WiFi Module – “WiCard” WiCard is a programmable WiFi module which connects to the user control panel or application via Wi-Fi. So It allows users to have access to its features over the air and wirelessly. WiCardTech group has designed the module as to not need a JTAG programmer after initial programming. Instead, WiCard modules…
Read more
