This project is a GPS Tracker (Locator) with Arduino AVR board (UNO/NANO) and Ai thinker A9G GPS/GSM/GPRS module. The Arduino board reads the GPS data and sends it to the web server/host via GPRS. Then you can see the location on map with the Google Map API. You can call to your “SIM Card” number,…
Read more
I provide electronics projects, schematics, arduino and microcontroller source codes and firmware in my on-line store. You can promote my on-line store (https://wicard.net/projects) and share the projects in your social media (facebook, twitter, linkedin, instagram etc. with hashtags and direct links), your blog or your website instead of paying the price with the cryptocurrency. Just…
Read more
This project is an “ESP32-Cam WiFi Robot” firmware arduino source code (.ino) and also can be used as a “Dome Camera”. This project is based on the “ESP32 WebApp Builder” and Arduino ESP32-CAM CCTV, WiFi IP Camera projects. The WiFi Robot project uses the “AI Thinker ESP32-CAM” module which has a 2MP Camera, 10 I/O…
Read more
From today we have decided to release the schematic plans, PCB plans and the source codes of most of our projects for free for a while. The following free arduino projects are available in our website: ESP8266 WiFi Microphone Free Arduino Project Source Code (ESP12, NodeMcu…) With this source code, an ESP8266 and a standard…
Read more
The IR receivers typically work in 37 KHz frequency. The “8 Channels Infrared Receiver” project receives the IR signal via HS0038A2 (or similar modules), which the module filters the 37 KHz signal and sends the data in 1 Kbps speed to the ArduinoUNO board. The Project’s Download Link: Infrared Receiver Source Code For Arduino UNO…
Read more
The high voltage (parallel) programming method which has been used in WiCardKit Software programmer is the highest layer of access to the microcontroller memories and programming. This method can unlock the AVR/PIC chips which can’t be programmed by regular programmers while the chips work well. The other feature is the “reset” pin in some the…
Read more
The high voltage (parallel) programming method has been used for the WiCardKit Programmer which is the highest layer of access to the microcontroller memories and programming. This method can unlock the AVR/PIC chips which can’t be programmed by regular programmers while the chips work well. The other feature is the “reset” pin in some the…
Read more
The main processor of the “1.2-24V Battery Charger Circuit” is ATmega8A. ATmega8A is an AVR 8 bit microcontroller which has 28 pins. This circuit has an internal volt-meter and temperature-meter with digitally calibration feature. The project contains 3 folders, “CodeVision Source”, “PCB-SCH-BOM” and “sim”. There’s a source code folder in this project which contains the…
Read more
ATmega8A is an AVR 8 bit microcontroller which has 28 pins. The “Alarm Clock And Calendar with AVR ATmega8a” project uses this microcontroller as its main processor and a standard 16×2 Character LCD without using any additional module. There’s a source code folder in this project which contains the CodeVision program files (C) and pre-compiled…
Read more
This project is a “Programmable and Code Learn IR Remote (InfraRed) With ATTiny13A”. ATTiny13A is a low-cost AVR microcontroller with 8 pins (6 I/O) and 1KB memory.There are two folders in this project, “PCB-SCH-BOM” and CodeVision Source.Also In the source code folder there is a pre-compiled file in the “HEX” folder. To re-compile or check…
Read more
